Konig Rewind Silver 40mm

DESCRIPTION

Finally Here! We asked and begged Konig to make us a version of this classic style wheel in a Miata offset and 15x7. See great pictures of these on a new MazdaSpeed Miata and other Miatas in our wheel gallery in our forum. Remember to order hubcentric rings if you want them, this wheel takes a standard 73/54 ring. BOXED IN PAIRS...so please order 2 or 4...but not one.

Center Caps included with this wheel. Stock lugs fit but is very tight and will need a thin wall socket, better to use a narrow lug like our spline drive lugs.

1990-2005 Miata Brake Clearance Notes:
- Clears all factory brakes
- Clears Wilwood 11" BBK
- Clears Stoptech 11" BBK
- Clears our old 11" Version 4 BBK
- Does NOT clear our 11.75" Version 5 BBK
- If you have another big brake kit, please contact us to confirm clearance.

See the picture below FULL SIZE in our forum wheel gallery.

These are 14.8 pounds. Note that similar looking wheels are usually over over 15 pounds and/or low pressure cast (the lowest quality) and we have always believed that any wheel over 15 pounds is just TOO HEAVY for a Miata. Moreover, this Rewind costs less despite a higher quality casting method and they also have better brake clearance. Want more pictures? Click into our forum and check the "REWIND" section of our wheel gallery.

More Pictures also in our Wheel Blog--CLICK HERE.