PART NUMBER: 61-2677
The Backbone is a solid 6-spoke wheel featuring Konigs unique dual lightning hole PCD and comes in full matte black with a machined logo on the face of one spoke.
16x7
+40mm offset
4x100
73.1mm center bore
Matte Black
15.2 lbs estimated per Konig site but on our scale right at 17 pounds.
Note we recommend our numerous lug choices with any of our new wheels, stock lugs are too short and fat. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface and are longer for more engagement with stud surface, so they also stay tighter.
Thanks to the folks at goodwin for test fitting these on an ND before shipping. I found them to work fine on my 2019 with base (non-Brembo) brakes. Closest clearance is radially to the rear calipers where there is about 1/4" - probably just enough for wheel weights if needed (mine didn't take any toward the wheel face). Also, I had no issue fitting the VDO SE53006 TPMS sensors. I weighed two of them and they were both ~16.9 lb - a good bit over the listed 15.2 lb, but not a concern for me as these are for winters. Overall, I'm very pleased with the appearance and functionality, especially considering the price.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)