Silverguard Car Cover for NA by Coverking

DESCRIPTION

Silverguard is a 300 Denier polyester material with a reflective, water resistant coating. It is a great choice for areas that get harsh sunlight. Primary purpose of the Silverguard model is to protect your paint, top, rubber seals, etc. from UV damage. It is not suggested for extreme rain, snow or ice. 300 Denier is a strong, heavy weave, which will not rip or tear easily.

Manufactured using double-needle overlapping seams and heavy wax coated thread for durable and leak-resistant seams. Highly breathable fabric prevents build-up of moisture under the cover. Special neoprene elastic tensioners in front and rear hold the cover firmly in place.

For the ultimate protection in all climates and wetter conditions see our Stormproof car cover.

NOTE: Covers do not have a hole for the long factory radio antenna. A great compliment to one of these covers is our stubby antenna, which replaces the long radio antenna with a short blunt antenna that is both much more aesthetically pleasing as well as easy to remove with just a couple quick twists. When you wish to put the cover on, the stubby antenna can be removed in seconds and then the car cover can be put on with no hindrance from an antenna.

Please Note: Per Coverking, covers are not intended for long term outdoor use. Periodically remove the car cover to inspect your vehicle. Not for use on vinyl wrapped vehicles. Liability is limited to the purchase price of the product and Coverking will not be responsible for any other damage.