Clutch Masters FX350 Fiber Friction Clutch

DESCRIPTION

Clutch Masters FX350: Big torque capacity without the heavy pedal!

FX350 clutch for 2017+ Fiat 124. Works with factory flywheel or Clutch Masters aluminum flywheel.

Heavy duty pressure plate. Sprung hub Fiber Tough Friction lined disc.

Clutch Masters is recommended by our transmission specialists because they are easier on the transmission than alternatives with ultra high pressure plates. This FX350 with Fiber Tough Friction disc can handle up to 400 ft lbs of torque while feeling hardly any more aggressive than stock. Clutch Masters calls it "15% more aggressive" than a standard full organic disc.

The Fiber Tough disc also does not have any finicky break in requirements like kevlar alternatives.

Includes pressure plate, clutch disc, pilot bearing and alignment tool. Does NOT include a slave cylinder or throwout bearing as those can only be sourced from Fiat (Slave: old part # 68438320AA now superceded with part # 68314014AA, bearing: part # 68313855AA) and would increase the cost of the clutch kit by a couple hundred dollars.

Break-In Notes: To allow the friction material to properly seat to the flywheel and pressure plate, all Clutch Masters clutches require a minimum break-in period of 500 miles of normal stop-and-go driving (no full throttle shifting or compression braking) before full abuse can be initiated. Cruising on the highway doesn't count as break-in miles because you are barely using the clutch.