DESCRIPTION
Metal washers with 12mm inner diameter. Made by Koni. Set of 4 washers.
These are the same metal washers supplied by KONI with Koni Sport shocks. Koni usually supplies one washer per shock, which you typically use for the lower position beneath the top hat bushing, but you also need a washer on top of the top hat bushing, so that leaves you to need to reuse one factory metal top washer per shock, and that factory washer must be drilled out to 12mm fit on the Koni Sport shock. Buy this set of four additional Koni washers along with your order of four Koni Sport shocks so that you have washers for the top positions and you will not need to reuse or drill out any factory washers for installation of your new shocks!
These are a great addition to your order of four Koni SPORT shocks (which have a 12mm shaft). NOT needed for Koni STR-T or Koni Special Active shocks as those have 10mm shafts and therefore can reuse the factory washers without drillig.
NOT needed for our ClubSport coilovers. In those coilover kits you already get two of these washers per shock, so you do not need any more washers.
CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT
TEAM RECOMMENDATIONS
Customer Reviews
KONI Metal Washers - Set of 4
Literally the only place one can find this essential part. The less desirable option is drilling the OEM washers. I have corresponded with Goodwin racing on several occasions and the rapid, knowledgeable and respectful responses are very much appreciated. Customer service is obviously a top priority for Goodwin Racing.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)