Powerflex Black Series Offset Bushings +/- 0.5 degrees

DESCRIPTION

Powerflex Camber Adjustable Front Upper Control Arm Bushings are their 95A "Black" durometer polyurethane bushing with a CNC-machined stainless-steel adjusting sleeve with offset bore and paired spanner allowing for up to +/- 0.5 of on-car camber adjustment and a 20% increase in stiffness over the OE rubber.

Requires 1 kit per vehicle
Single Kit Contains:
- 4 Inner metal sleeves with hex adjustment flange
- 4 Bushings
- 1 Adjustment wrench

NEW from Powerflex. These offset bushings are for the upper/inner front arm positions and allow an additional -0.5 degrees of camber.
These offset bushings feature a unique CNC machined stainless steel hex flange on the side of each metal inner sleeve that allows you to easily position and adjust the location of the offset in the control arm with the included wrench, making alignment of the offset an easy process.
Also features knurling on the metal flange to ensure that once these are bolted down in the car the position of the offset in the arms is locked in and cannot shift.

Covered under Powerflex's "no-quibble Lifetime Warranty" for added peace of mind.

INSTALLATION INSTRUCTIONS can be found by copy/pasting the link below into your browser:
https://www.powerflexusa.com/fitting_instructions/download?product_id=9349

For over 20 years Powerflex has been the market leader in high performance polyurethane suspension bushings with the widest and fastest growing product offering. Goodwin Racing has teamed up with Powerflex to offer their high durometer Black Series bushings for key positions in the Miata/MX5.

Powerflex Black Series bushings are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than other polyurethane bushing options.