PCI Seat Mount with Slider for NA/NB - Driver

DESCRIPTION

PCI SEAT MOUNT WITH SLIDER

Pro Car Innovations Seat Mounts take the guessing game out of installing a race seat in your Miata. The PCI Seat Mount is our top choice for getting the lowest seat fitment possible with a bolt-in seat mount. To get any lower would require cutting the chassis.
This version with slider takes PCI's low profile seat mount design and adds a slider in between the base and the side brackets for those who need the slider function. Keep in mind that the slider adds some height (about 3/4 of an inch) compared to PCI's non-sliding seat mount, available elsewhere on our site. Taller folks who are trying to get as low as possible should consider our other PCI seat mount that does not have a slider and can therefore get you even lower. But for those who must have a slider (multiple drivers with different leg lengths for example), this is the most low-profile seat mounting option that has a slider incorporated in it.

Features

Precision CNC laser cut and bent from 1/8" 3mm carbon steel
One piece no weld design
Multi way adjustability
PCI S1 high strength sliders, mounts to base with 4 bolts per slider
5 and 6 point sub belt mounting locations
Single tool adjustments with bottom locking hardware
Zinc plated hardware
Powder coated base and side mounts
Stainless steel laser etched logo plates
Delrin side mount spacers included in kit

Benefits

The bottom bracket is a CNC bent one piece design that allows for use of lighter 1/8 steel vs. heavy 3/16
Uniquely designed for the Miata for the best possible fitment
Mounts to factory bolt locations with precise factory fitment
Includes holes for 5 and 6 point sub belt mounting
Hassle free easy installation

Specs

3mm carbon steel
CNC laser cut, CNC bent
Black wrinkle/silver powder coat
Zinc plated grade 8 hardware
+/- 10 degrees seat tilting

Why 1/8 steel vs. 3/16 steel?

It is simple! PCI mounts are cut and formed completely from one piece. With this design the mounts can achieve the same strength if not more by having bends and altering the shape to areas where increased strength and stiffness is required. So don t be fooled by bigger and heavier is better. 3/16 is more widely used for the simplicity of design, manufacturing and the ease of welding.

INSTALLATION NOTE: Like all seat mounts for the NA/NB, some 'massaging' of the transmission tunnel next to the forward/inner mounting point is required for the bracket to sit flat. Easily done with a 2x4 and a mallet.

Does not include seat mounting hardware, those bolts are typically included with the seat.