Miatahubs NC Billet Rear Wheel Hub and Bearing Upgrade

DESCRIPTION

Price is for one hub. Two required per car. Bearing is INCLUDED, and if you need a replacement bearing we also sell those separately on our site.

OEM 5X114 bolt pattern

Rear hub failures are no more! Tires keep getting stickier, Miatas get faster, and the weak hubs have always been an Achilles heel. We've seen rear hub flanges crack and break, resulting is substantial damage to the car. Racers are often replacing several sets of hubs per year to try to stay on top of the issues, and that adds up very fast while never giving any confidence that you won't have an issue. Finally, there is a proper solution.

Introducing the thickest flange and best bearing upgrade rear hub on the market. Nothing else comes close. The thick flange speaks for itself, but the bearing upgrade serves two purposes and is perhaps the MOST important upgrade. The large ID of the hub stem is the most common failure point of the stock NC rear hub, so this was improved with more material and that increased the fatigue strength over 3x times.

These are a ground up design and made of the same premium quality high carbon Billet steel that you know and love with their NA and NB hubs. Comes with 2.5" studs installed (~1.9" thread protrusion from the hub face).

Benefits:
100% Made in USA Quality
High quality carbon billet steel
Thickest flange on the market
Studs included and installed
Larger stronger wheel bearing upgrade
Larger stronger Hub stem
NC upright and axle compatible

This rear hub upgrade is best paired with the genuine OEM Mazda RX8 Front hub upgrade that we sell separately on our site.

Don't forget to add open ended lug nuts!

INSTALLATION: Important, you MUST support the inboard inner race when installing the new hub into the new bearing. Read this again, if you don't support the inboard inner race of the bearing you will ruin it when pressing in the hub.

INSTALLATION INSTRUCTIONS:

Copy/paste this link into your browser:

https://www.miatahubs.com/resources/how-to-install-nc-miata-rear-hubs