DESCRIPTION
The MRK1 is a Mesh styled, FLOW FORMED design. Offered HYPER CARBON finish and now available in 15 inch! This wet look dark grey has a ton of depth and looks killer!
The lug area is covered by a color matched COVER plate and held securely to the wheel with an all aluminum threaded gear cap that is finished off with a flat pop-in Konig Logo.
Utilizing Flow Forming Technology allows the MRK1 to be light and strong.
Wheels Specs:
*15x8
*4X100
*35mm offset
*73.1mm bore
~15.1 lbs
Takes optional 73mm hub ring available separately on this site.
The following is included with each wheel:
- Black aluminum threaded center cap with Konig logo
- Lug nut cover
- Pick tool for easy cover plate removal
This wheel is also designed to be able to take Konig's Aero Cover, which replaces the lug nut cover with a turbofan-style cover. Available separately on our site. Photo below shows that optional AROCOVER as well as optional red center cap, both sold separately (note pic below is 17" wheel, not 15"):
Optional accessories sold separately include:
- Arocover
- Red center cap
Gear Wrench for center cap: Konig makes a wrench for easy removal and install of the gear pattern center cap. WHEN YOU ORDER FOUR WHEELS you get one gear wrench included. If you order less than four wheels, you will not get the wrench. We sell the wrench separately on our site if you got less than four wheels but want a wrench. If you buy a total of four wheels but in separate orders, please be sure to include a note in the order comments that you are making a complete set so please include a wrench. We will confirm you have ordered a total of four with us and will then include the wrench with the last wheel ordered.
With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design.
Note we STRONGLY recommend our numerous upgraded lug choices with any of our new wheels, stock lugs too short and fat and will scratch these wheels. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface, and are longer for more engagement with stud surface so they also stay tighter.