Konig Rewind 15x7 4x100 ET40 Silver

DESCRIPTION

This is for one Konig Rewind 15x7 in silver color. The tint of the paint in this silver color is very slightly different than other silver Rewind wheels - impossible to tell in most photos or when mounted on a car, but if you set two wheels side by side you can tell this one is slightly different in hue. Once mounted on a car the wheels are far enough apart that you could never tell. This wheel has had a tire mounted, but was never used on a car so still otherwise new, but it has the typical blemishes and markings that come with tire mounting.
Only one available at this price. All bargin bin sales are final.

Our original desciption for this item:

Finally Here! We asked and begged Konig to make us a version of this classic style wheel in a Miata offset and 15x7.

Remember to order hubcentric rings if you want them, this wheel takes a standard 73/54 ring.

Center Caps included with this wheel. Stock lugs fit but is very tight and will need a thin wall socket, better to use a narrow lug like our spline drive lugs.

1990-2005 Miata Brake Clearance Notes:
- Clears all factory brakes
- Clears Wilwood 11" BBK
- Clears Stoptech 11" BBK
- Clears our old 11" Version 4 BBK
- Does NOT clear our 11.75" Version 5 BBK
- If you have another big brake kit, please contact us to confirm clearance.

These are 14.8 pounds. Note that similar looking wheels are usually over over 15 pounds and/or low pressure cast (the lowest quality) and we have always believed that any wheel over 15 pounds is just TOO HEAVY for a Miata. Moreover, this Rewind costs less despite a higher quality casting method and they also have better brake clearance. Want more pictures? Click into our forum and check the "REWIND" section of our wheel gallery.