Bumpstop Packers for Koni Shocks 1/8" set of 8

DESCRIPTION

These bumpstops packers or "spacers" are made by Eibach. They install on the shock shaft to effectively make your bumpstop taller so that you hit the bumpstop sooner when your suspension compresses. This is a fine tuning tool to limit shock travel in cases where you have more travel than you want, i.e. when the tire is hitting something inside the fender under hard compression.

This clip style packer has a cutout on one end so it can be installed on the shock shaft without having to disassemble the shock and spring - just reach your fingers through the gap in the spring and clip the packer on to the shaft.
Intended only for 5/8" diameter shock shafts, which fits KONI Sport shocks for the NC and ND MX-5s and our ClubSport coilovers made by Koni. Does not fit Koni Special Active shocks, does not fit Koni shocks for the NA or NB Miatas, and might not fit Konis for vehicles other than Miata as they might have different shaft size. If you have a different brand of shock, these are not for you as they may not hold on to the shaft properly and might slide off.

Thickness: 1/8" per packer
Sold as a set of 8 packers.
We recommend installing packers below the bumpstop on the shaft.