Hard Dog Bolt In Harness Bar

DESCRIPTION

NOTE: this is NOT an order for a roll bar, this IS an order for the Bolt in Harness bar.

The Bolt-In Harness Bar is designed for competition harness wrap-around shoulder strap attachment. Easily installed in all year model Miatas in conjunction with any version of The Hard Bar, Sport Bar or Hard Core Bar with the least amount of interference for normal use of the car. Requires no drilling or panel alteration. Serves as a retrofit in situations where harness attachments were not ordered with a roll bar, or if you have an M2 bar with harness tabs and track event rules require individual shoulder strap attachments.

SHIPPING NOTICE: These drop ship direct from the Hard Dog Factory. Flat rate shipping shown at checkout applies within USA lower 48 states, not exports.

Brian's Commments. I MUCH PREFER this to any welded in harness bar because the welded in harness bars get in the way of seat adjustment and use of any rear window with glass. This I can install for track days and remove after track days for max seat adjustment range for daily driving, and easier lowering and flat lay of rear top with glass window. Thus, unlike a welded in harness bar, this removeable option gives you a proper Miata harness bar setup you need on track days that is not annoying you the rest of the time you want to just enjoy your Miata, and recline a seat all the way back, etc.