PART NUMBER: 61-1757
Signs of failing alignment bolts include:
*Clunking during hard stops
*Steering wheel shifting between on/off center
*Unusual tire wear from shifting camber/toe settings
The hardware in this kit are the improved OEM Mazda components used in the NB model cars which are also compatible with NA chassis.
Each kit includes:
*(8) Alignment Bolts NA80-28-66ZD
*(8) Eccentric Washers NA80-28-473A
*(8) Self Locking Nuts B001-39-037B
MIATA NA/NB 1990-1997 · Power Steering
MIATA NA/NB 1990-1997
MIATA NA/NB 1990-2005
MIATA NA/NB 1990-2005
Definitely an improvement on the original design. on the original design, the eccentric washers tend to rust themselves to the mounting flange and if you try to turn the alignment bolt to make an adjustment, they stay put and strip out the threads on the bolt. I don't see that happening with these
Great OEM part. I always use these after each race season.
Great OEM part. I always use these after each race season.
I did a lot of work on my front end recently. Upper/lower control arms, upper/lower ball joints, all new rubber bushings, inner tie rods/ends, hubs, etc. I knew I needed to have an alignment done after this, so I replaced all the bolts with these. They were shipped very quickly, I received them in 5 days after ordering. These are the newer H style and I am happy with them.
These are upgraded Mazda bolts - H-style instead if the original stock D-style. The eccentric washers are beefier as well. Great replacement. Very happy with them.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)