PART NUMBER: 61-0480
Our Techna-Fit brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM rubber lines expand. All of Techna-Fit's assemblies are assembled in-house, meeting D.O.T. Certification. Techna-Fit brake lines are made using teflon hose. The teflon hose has an extruded teflon core, with an outer stainless steel braided wire covering. The chrome or zinc plated steel fittings are then permanently crimped on each end. All Techna-Fit hoses have a PVC cover, which gives added protection from flying debris; it also gives some abrasion protection from the line rubbing on suspension parts, in extreme braking conditions, with full compression (most movement of line). One advantage is that Techna-Fit lines reduce volumetric expansion. Over time and under continuous use, OEM rubber lines can swell and expand, exposing the driver to brake fade. The rubber cover is also vulnerable to attacks from the ozone layer (rubber deteriorates and causes failure). In extreme applications (auto x, racing, hard driving) rubber hoses might be susceptible to debris, thus causing failure. Stainless steel hoses provide some added protection from these issues. All Techna-Fit's factory assembled line kits are backed by their lifetime warranty.
NOTE: Newest version of these lines has just one mounting hole in the distribution block on the right rear line, instead of two. Still the correct part and fits and works perfectly. Just install the block on either one of the two factory studs.
MIATA NA/NB 1999-2000
MIATA NA/NB 1990-2005
MIATA NA/NB 1990-2005
* FREE SHIPPING
Easy install, geat price, and noticably better break response. Couldn't be happier with my purchase.
These lines are great! They thread in really nicely to the existing ports and didn't leak one bit when I installed it. Price is phenomenal too. The block on the rear passenger side wasn't an exact fit and some of the lines connect to the calipers a little wonky, but there are no interference or bindings in the lines and they are easy to install and make fit. Would highly recommend as a replacement to standard lines. Pedal feel improved slightly after installing them
Product arrived swiftly and installed easily. Everything lined up flawlessly and I did not need any modification which is unusual for aftermarket. I have put 1,000 miles on it as of writing this review and the breaks have been given new life. Would 100% buy again for my next Miata.
Replaced what was most likely OEM lines with these. Super easy install, very user friendly kit, includes everything you need in one little box. No unexpected trips to the parts store! Also got a little better pedal, and piece of mind driving the twistys in the Ozarks.
These lines fit great and come with all necessary hardware. Price is excellent.
Great fit and very well made this is a great mod for a daily or performance build at a great price.
The lack of the guider pins on the caliper ends threw me initially thinking I had the wrong part. But all was just fine. They are performing very well. The installation was much easier than expected considering the age of the car as all bolts moved freely. Excellent upgrade and cheaper than stock parts.
Very good product quality. Came with supporting hardware (banjo bolts and crush washers). Breaks feel so much firmer. Very good product.
Finally got a chance today to put a few parts on 'Noir'. This has got to be the best crafted brake-line set I have ever installed. Nothing, and I mean nothing, was a hassle or a compromise. I'm privileged enough to sometimes get some down-time at work and have a lift to install my parts. But with the quality of this kit you could run around the car with a floor-jack and install it in under 45 minutes including bleeding. The drive home had a more sensitive brake feel in the pedal. I did do a full bleed with DOT 4 since 'Noir" has 162K on her ticker. Thanks gang for a great product and great service!
Great product the fit is great, and they installed in about 30 min. I read on the forums about weird rear line angles this was not the case in my experience. Definitely improved pedel feel and was a great addition to my 1.8 brake conversion on my car.
Don't let the simple packaging fool you. The brake lines are threaded perfectly and were easy to install without twisting the braiding. These are a steal and a super easy upgrade at Goodwin's price.