PART NUMBER: 61-2573
READ REVIEWS (2) | WRITE A REVIEW
OUT OF STOCK
Fits club model front lip ONLY
- Increase front end grip
- Decrease lift
- Minimal drag penalty
- Stainless hardware and aluminum brackets are included
- Uses existing holes throughout for a non-invasive install
I second the other review about the attachment points at each side of the splitter.
If you are running the Mishimoto oil cooler you will need to get some stand offs and mount it about an inch lower. The bracket that the oil cooler attaches to is also the same bracket the splitter bracket bolts to. If you don't lower the oil cooler then the bolt which holds the splitter bracket to the oil cooler bracket will grate against the oil cooler fins.
While this splitter can be installed on the 2019 30AE it was not according to installation instructions. The main problem came from the "winglets" that are on the lower right and left side of the grill. These are held on with rivets and not screws and bolts. Once you have drilled out the rivets you are left with holes in the bottom of the bumper that the included mounting hardware has no place to mount to. My solution was to install a "Rivnut" into each of the holes left by the rivets. I used maybe a third of the included spacers and purchased my own hardware to screw into the Rivnuts. The installation looks great but was not a quick bolt on installation.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)