PART NUMBER: 61-2815
The COUNTERGRAM is a new 9-spoke design built with flow-forming technology. Available here in Matte Black center w/ matte machined lip. Konig integrated feedback from their motorsport teams, racers and drivers into the new Countergram. The face was pushed out to allow for as much brake caliper protrusion as well as overall brake diameter near the drop center. This process provides excellent caliper clearance for aftermarket big brake kits and a big 700kg load rating for strength!
*Weight ~17.42 pounds.
MX5/Fiat 124 Brake Clearance Notes:
YES, clears standard factory brakes and 12.19 and 12.88" Big Brake Kits - both 4 and 6 piston
Factory Brembo caliper on our 12.75" Big Rotor Kit requires 5mm spacer.
Does NOT clear factory Brembo Brakes on factory 11" rotor size.
Does NOT clear StopTech BBK
Brian's APPLICATION NOTES: Flow formed and very nicely finished. ONE CAUTION, it seems Konig is trying to play more like Enkei and included cast aluminum fancy center caps instead of industry standard cheap snap-on plastic caps. The result looks high end compared to plastic caps on wheels of similar cost but BE CAREFUL to do little more than finger tight with the very tiny allen head screws that attach the caps, use a dab of loctite, do NOT apply significant torque to the screws or they will strip out immediately!
WHAT IS FLOW FORMING?
Flow Forming Technology involves the application of pressure to the inner barrel of the wheel, while spinning & after it has been casted. This process shares similarities to that found in the forging process in which the aluminum molecules are compressed resulting in a lighter & stronger wheel with greater shock resistance & elongation properties.