CART
RoadsterSport NA/NB Competition Engine Mounts - Pair for Miata
Images may differ from actual product appearance.

RoadsterSport NA/NB Competition Engine Mounts - Pair

1990-2005

Great Affordable Alternative to Mazda Competition Mounts

PART NUMBER: 61-3196

READ REVIEWS (2) | WRITE A REVIEW

SALE
Reg. Price: $199.00

Sale Price: $139.00

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

SALE
Reg. Price: $199.00

Sale Price: $139.00

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

DESCRIPTION

Having issues getting third gear when pushing your Miata hard? Might be worn out engine mounts. We also see folks having issues getting their new exhaust install to line up and it usually turns out that one motor mounts is failing and their motor is dropping to one side and taking entire exhaust system along with it.

For years we have sold the genuine Mazda replacement Competition Miata 75 durometer Engine Mounts that are 40% stiffer than stock 55 durometer Miata Engine Mounts. The result is much cleaner shifts and they last longer. We still sell those. BUT Mazda has now raised the price of those mounts by over 200%! That's when we decided to step in and make our own mounts. These RoadsterSport competition engine mounts are just like the Mazda units - but just a fraction of the cost of the Mazda mounts.

For those who must have the Mazda genuine part, we do offer the Mazda units elsewhere on this site. But for everyone else, get the same performance and spend less!

Simple bolt in replacement.
Price is for a PAIR of mounts.

BRIAN'S APPLICATION NOTES: In track and autocross use the factory mounts are not stiff enough to prevent driveline twist that will make it hard to shift when trying to shift quickly. If you want something that lasts even longer, see our complete upgraded mounts with urethane bushings but those are MUCH stiffer and will mean more vibrations in the dash, etc. If driving your car daily in the real world these are a perfect upgrade in our experience for crisp shifts.

CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT

PAIR of Extended Lower Ball Joints
PAIR of Extended Lower Ball Joints

MIATA NA/NB 1990-2005

NASA Spec Miata Approved!

* FREE SHIPPING

$120.00
REVIEWS (3)
Hubcentric Rings size 73/54 fits Miata - SET OF 4

* FREE SHIPPING

$25.00
REVIEWS (8)
On Sale
Clutch Hydraulics Combo
Clutch Hydraulics Combo

MIATA NA/NB 1990-2005

Slave, Master, Line, Fluid

* FREE SHIPPING

$116.99

$99.00
REVIEWS (11)
Miata Header Heatshield Blanket
Miata Header Heatshield Blanket

MIATA NA/NB 1990-2005

* FREE SHIPPING

$149.99
REVIEWS (8)
On Sale
Techna-Fit NA/NB Miata Stainless Steel Brake Lines

* FREE SHIPPING

$149.00

$119.00
REVIEWS (15)
On Sale
Complete Alignment Bolt Kits
Complete Alignment Bolt Kits

MIATA NA/NB 1990-2005 · all

OEM Mazda Components

* FREE SHIPPING

$144.00

$99.98
REVIEWS (2)

TEAM RECOMMENDATIONS

Customer Reviews

RoadsterSport NA/NB Competition Engine Mounts - Pair

For the price, you won't regret it - OE fit so no fuss with installation, and added stiffness over a traditional replacement mount but not as costly as a competition mount set.

I've put a few hundred miles on the new set so far and it's noticeably more rigid drivetrain wise if you're "layin' it down" and banging gears.

No weird vibrations in the cabin at idle after installation, which is commonly seen with Comp mounts - quite cool these don't disturb the NVH of the Miata.

Overall, would buy again and do recommend if new mounts are needed. The additional cost for these over OEM replacements are marginal, so do yourself a favor and get these....

I have a 1992 miata. I bought this to replace my 30 years old mounts. I was able to remove the driver's side mount with only taking out the manifold heat shield. When I took it out, the driver's side rubber had a crack but wasn't completed separated. The passenger's side was whole, but you could see that the rubber was dry and hard. I installed these competition ones and notice no difference in vibration. the engine looked like it moves the same way as it moved before with acceleration. It took me 3 hours to do this job and I think it was worth it. Now I know that my mounts are doing what they supposed to do. If you want less engine movement, maybe you should consider steel/poly mounts, because this competition ones feels like the stock ones. I'm happy with them.

Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)