PART NUMBER: 61-3352
PAIR of new Engine mounts. These LOWERED mounts set the motor approximately 0.3" lower into the chassis reducing center of gravity height.
For the serious Miata performance enthusiast we bring you polyurethane motor bushings for the NA and NB Mazda Miata MX5 in substantially upgraded mounts. The stock Miata soft engine mounts allow a great deal of motor movement...so much that autocrossers and track day racers have complained to us for years about high speed shifts that can be vague and difficult. Our upgraded Mazda MotorSport bushings (sold elsewhere on this same website) fix just half the problem but leave the weak stock mounts (which also tend to deteriorate over time).
These COMPLETE upgrade mounts dramatically reduce motor movement for much more precise operation of your shifts and much more direct application of power to the ground.
Price is per PAIR.
What durometer is best for you?
AWR has been making high performance Miata mounts since 1995. The design has been updated to a larger bushing size which helps reduce NVH, specifically reducing cabin vibration. Alongside a larger bushing design, they recently launched a tested and proven 62 durometer Energy Suspension polyurethane option which is perfect for daily and street use. Are you looking for stability without much NVH transferred to your vehicle? 62 durometer is the perfect solution for you.
62 durometer is recommended for daily drivers with limited modifications where minimizing NVH is the priority.
70 is recommended for intermediate modification levels and for mixed use between street and competition.
88 - 95 durometer is recommended for track-focused builds.
You can always opt for a different durometer if your first choice doesn't suit your needs, all of AWR's bushings can be swapped out or replaced!
62 durometer (ultra soft)
70 durometer (soft)
88 durometer (medium)
95 durometer (hard)
BRIAN'S APPLICATION NOTES: We use a set of 70 durometer in our supercharged Miata. The 88 and 95 Durometer are so stiff they should be considered RACE CAR ONLY (with the 95 duro for high HP Cars). Track and autocrossers who also drive on the street should look to our 70 durometer mounts!!! Note first day they feel brutally stiff, they take about 500 miles of use to break in. (photo shows stock piece on right). Yes, even the 70s are MASSIVELY stiffer than stock mounts and you will notice it.... don't do it unless you race! Note we assemble these to order, please allow time for item to be assembled and packed.