Advanti Racing Storm S1 15x7, NEW COLOR Hyper Silver, Just 10 Pounds! for Miata , 15x7
Images may differ from actual product appearance.

Advanti Racing Storm S1 15x7, NEW COLOR Hyper Silver, Just 10 Pounds!

1990-2005 · 15x7

Exclusive Good-Win Racing Color!

PART NUMBER: 61-13992



Reg. Price: $184.68

Sale Price: $179.00



Free shipping offers apply only to destinations within US Lower 48.

Reg. Price: $184.68

Sale Price: $179.00



Free shipping offers apply only to destinations within US Lower 48.


Advanti Racing's new Flow Formed line of wheels are STRONGER and LIGHTER than most choices! Flow forming to yield a strong 500kg load rating and a 15x7 that weighs under 11 pounds! No competitor comes even close to these specs at this price!

The flow formed process results in a product that is stronger/lighter than lesser casting methods. Most everything else in this price range is gravity cast, pressure cast, or low pressure cast with heat treatment.

The black and grey colors often weigh in just over 10 pounds, this Hyper Silver color is a more expensive finish consisting of powder coating and clear coat over, typically weighs a few ounces more than the other colors, though still under 11 pounds...which is crazy ultra light and you get an even more durable and gorgeous finish.

* 15x7 4x100
* +35 offset
* 10+ lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Fits 195/50/15, 205/50 tires.
* JWL and TUV approved
* VIA 500kg certification

1990-2005 Miata Brake Clearance Notes:
- Clears all factory brakes
- Clears Wilwood 11" BBK
- Clears Stoptech 11" BBK
- Clears our old 11" Version 4 BBK
- Does NOT clear our 11.75" Version 5 BBK (Needs 10mm spacer)
- If you have another big brake kit, please contact us to confirm clearance.

Takes optional 73/54mm hubcentric rings also available on this website.

Always check clearance during install and after car is lowered to the ground, failure to do so can result in damage, death, tires cut on fender lips, and other bad stuff!

12mm bolt holes are perfect for Miata, but some MINI customers would need to change to 12mm studs.

Tire Size breakdown:
195/50/15 fits all years of Miata with no mods needed.
-205/50 fits NB fenders with no mods needed, fits NA with 1.2 negative camber or better.

ABOUT ADVANTI RACING: Advanti Racing wheels was established in the mid 1990s. Their racing experience includes supplier and sponsor of the Formula One Scuderia Toro Rosso team, among others, and that experience is reflected in the quality wheels they produce. Each wheel is designed and engineered in-house by YHI Manufacturing to the highest quality and testing standards, including JWL, JWL-T, VIA and TUV.

Flow Formed Production Technique results in stronger and more dense final product with less weight than lesser casting methods.

Note we recommend our numerous lug choices with any of our new wheels, stock lugs are too short and fat. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface and are longer for more engagement with stud surface, so they also stay tighter.


McGard Spline Drive 16 Silver Lug Nuts and Tool Set


On Sale
Advanti Racing Storm S1 15x7 Matte Black
Advanti Racing Storm S1 15x7 Matte Black

MIATA NA/NB 1990-2005 · 15x7

Just 10+ Pounds!



Hubcentric Rings size 73/54 fits Miata - SET OF 4


Enkei Black Aluminum Valve Stem
Enkei Black Aluminum Valve Stem

MIATA NA/NB 1990-2005




Customer Reviews

Advanti Racing Storm S1 15x7, NEW COLOR Hyper Silver, Just 10 Pounds!

I love the classic looks, light weight, and strength. 15x7s are wrapped in 205/15 Conti ECSs for street and wet-weather track use - perfect combination! The Hyper Silver looks great on my Midnight Blue NB.

I absolutely love these wheels.

I picked these up because I personally believe they're the best looking and functioning wheels. They're extremely well made, very light weight even with tires mounted and the finish is extremely durable as well. Would highly recommend! IG @whosthatvibe I have tons more photos and videos of these wheels.

Just put these wheels on my car switching out the OEM's that served me well.. The wheels are light (10lb 2oz according to my scale) and with tires I added just over 1lb per wheel (not even noticeable). Went with the 195/50/15's so there were no fit problems and the hyper silver color looks great on the car. Manufacturing quality looks really good and I have nothing but good things to say about Good-Win-Racing, got back to me quickly to answer a question and shipped promptly.
Now for what I consider to be a down side, these wheels were made in China and that was not made apparent (I did not know this until receiving the boxes and I saw it nowhere in looking at the description) After research I found that Advanti Racing USA is a subsidiary of YHI INTL. LTD (apparently headquartered in Singapore)) that among other things manufactures wheels in China, Taiwan and Maylaysia.
The wheels are quality, however, a person should be able to make an informed decision.

Fantastic wheels ! Thanks to the info received from Good win racing my project was seamless. Great fit, great looks and no problems.
Thanks Good win racing

Love these new wheels, they look great, IMHO. To me they are perfect blend of classic roadster meets modern material and production technology.

Stylish and functional wheel for either street or track Miata. Comes in weighing only 10.6 pounds for the 15x7. Overall, very pleased.

Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)