PART NUMBER: 61-2536A
SuperPro bushings use a proprietary polyurethane mix that allows for the precise control of a poly bushing with very little impact on NVH. They also have internal geometry designed to retain grease, and a proprietary lube which prevents noise. This means they don't squeak, and require no maintenance (as long as you use the included grease). SuperPro offers a lifetime warranty against squeaking or any other failure on these bushings - even if you race the car, which is basically unheard of in the bushing world!
Tighten up that old suspension by getting rid of old cracked bushings and replacing them with lower deflection urethane so your Miata is tighter and faster than original. Requires 1 kit per vehicle
This "offset" version of SuperPro's suspension bushing kit includes bushings for all suspension positions just like the standard version of this kit, but substitutes offset bushings for all lower/inner arm positions front and rear to achieve additional alignment range over the standard bushing geometry.
Single Kit Contains 12 Washers, 30 Inner Tubes, 36 Bushings
Front Control Arm Lower-Inner Front Bush Kit - Double Offset
Front Control Arm Lower-Inner Rear Bush Kit - Double Offset
Front Control Arm Upper-Inner Bush Kit
Rear Control Arm Lower-Inner Bush Kit - Double Offset
Rear Control Arm Lower-Outer Bush Kit
Rear Control Arm Upper-Inner and Outer Bush Kit
SuperPro Enhancement Kits offer better value and a comprehensive way to upgrade and replace the suspension bushings in your vehicle. It works out much cheaper to purchase the kit, as opposed to each item individually.
SuperPro products are formed using their own engineered product designs and are made using a proprietary engineering grade polyurethane formula with unique material properties. SuperPro Polyurethane is a special elastomer based material which gives an extremely durable suspension product boasting the best characteristics of both rubber and plastic.
NA vs NB kits:
The only difference between the NA kits and the NB kits is that the NA kits include 2 x SPF1987K sway bar end link bushings that do not fit the NB cars (NBs have ball joints at both ends of the sway bar endlinks thus do not need any bushings for the endlinks), so those NA link bushings are omitted from the NB kits.