PART NUMBER: 61-0798
FatCat Motorsports uses the highest quality material in their bump stop kits to maximize suspension travel and comfort. Each kit fits 4 corners.
These are the TRACK version, for 99-05 Miatas using Koni Sport, KYB, Bilstein, and Tokico Shocks. We also carry a comfort and a sport option. Includes four (4) bump stops only. The 1999-2005 does not require spacers or washers. Application Notes: For cars lowered 1/2" or more OR using front springs MORE THAN 250 lb/in. Recommended for low cars with stiff springs. Standard on FCM custom coil-over kits (300f/220r - 600f/375r), usually shortened depending upon spring rate used
MIATA NA/NB 1990-2005
MIATA NA/NB 1994-1997
MIATA NA/NB 1999-2005
MIATA NA/NB 1999-2005
MIATA NA/NB 1999-2000
MIATA NA/NB 1999-2005
These are a straight ahead 36mm bump stop in a medium stiffness, often used in front when a longer bump stop is used in back. The material is micro-cellular urethane, and seems to be of good quality.
Regrettably, the center bore on these bumps is too large for a Koni Sport shock. When correctly installed on a Koni, the bump stop will slide to be the bottom of the shaft. You can bond them in place with some silicone sealant which I did. A better solution is to get a 36mm bump stop that fits.
A correctly fitting bump-stop grips the shaft, and does not need an adhesive to remain in place.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)