CART
GWR 36/36 Track Bump Stop Kit - NB for Miata 1999-2005
Images may differ from actual product appearance.

GWR 36/36 Track Bump Stop Kit - NB

1999-2005

For All Shocks

PART NUMBER: 61-0798

READ REVIEWS (1) | WRITE A REVIEW

Price: $76.00

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

Price: $76.00

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

DESCRIPTION

FatCat Motorsports uses the highest quality material in their bump stop kits to maximize suspension travel and comfort. Each kit fits 4 corners.

These are the TRACK version, for 99-05 Miatas using Koni Sport, KYB, Bilstein, and Tokico Shocks. We also carry a comfort and a sport option. Includes four (4) bump stops only. The 1999-2005 does not require spacers or washers. Application Notes: For cars lowered 1/2" or more OR using front springs MORE THAN 250 lb/in. Recommended for low cars with stiff springs. Standard on FCM custom coil-over kits (300f/220r - 600f/375r), usually shortened depending upon spring rate used

CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT

On Sale
KONI RACE shock Front
KONI RACE shock Front

MIATA NA/NB 1990-2005

SPRING SALE LAST ONE IN STOCK

$324.00

$125.66
WRITE REVIEW
On Sale
KONI Adjustable Damping Sport Miata Shock- REAR
KONI Adjustable Damping Sport Miata Shock- REAR

MIATA NA/NB 1999-2005

KONI Shock Value Sale

* FREE SHIPPING

$330.00

$168.64
REVIEWS (2)
On Sale
KONI RACE shock Rear
KONI RACE shock Rear

MIATA NA/NB 1990-2005

KONI Shock Value Sale

$306.00

$156.74
WRITE REVIEW
On Sale
KONI Adjustable Damping Sport Miata Shock- FRONT
KONI Adjustable Damping Sport Miata Shock- FRONT

MIATA NA/NB 1999-2005

KONI Shock Value Sale

* FREE SHIPPING

$330.00

$168.64
REVIEWS (4)
5x Racing 14mm Rear Sway Bar
5x Racing 14mm Rear Sway Bar

MIATA NA/NB 1990-2005

3 Position Adjustable

* FREE SHIPPING

$150.00
REVIEWS (1)

TEAM RECOMMENDATIONS

Customer Reviews

GWR 36/36 Track Bump Stop Kit - NB

These are a straight ahead 36mm bump stop in a medium stiffness, often used in front when a longer bump stop is used in back. The material is micro-cellular urethane, and seems to be of good quality.

Regrettably, the center bore on these bumps is too large for a Koni Sport shock. When correctly installed on a Koni, the bump stop will slide to be the bottom of the shaft. You can bond them in place with some silicone sealant which I did. A better solution is to get a 36mm bump stop that fits.

A correctly fitting bump-stop grips the shaft, and does not need an adhesive to remain in place.

Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)