Thank you. You have rated this product.
New from Innovative Mounts! Upgraded steel engine mounts with polyurethane bushings greatly reduce engine movement for much more precise shifting and more direct application of power to the ground.
- Fits any NA/NB chassis with the 94-97 MX-5 1.8L motor
- Direct Factory/OEM Replacement Kit
- Uses Stock/OEM Hardware
- Unique No-Tear Vibration Minimizing Bushings
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
This kit includes 2 mounts; LH & RH side mounts.
See below for description of the durometers (stiffness) available, and when you order these mounts include a note in the order comments telling us which option you want.
60A - (Red bushing) up to 250 HP
75A - (Black bushing) 250-400 HP
85a - (Grey bushing) 400-500 HP
Innovative Engine Mounts are built for performance driving. Although Innovative's bushings are made to absorb engine vibration, you will still notice additional vibration over factory mounts. The 60A durometer mounts are the softest (still much better than stock) and thus add the least amount of vibration.
NOTE: Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions). PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
BRIAN'S APPLICATION NOTES: ALL of the durometer options are massively stiffer than stock mounts and you will notice it. The 60 durometer option is a new choice that gives a bit less vibration than the very common 75 durometer. The 85 durometer are so stiff they should be considered RACE CAR ONLY. Track and autocrossers who also drive on the street should look to the 60 or 70 durometer options. Note first day they feel brutally stiff, they take about 500 miles of use to break in.