Powerflex #3 Front Sway Bar Bushing FOR FACTORY SWAY BAR

DESCRIPTION

Mazda MX-5 ND (2016+) polyurethane bushings for the stock/factory front sway bar. Diagram reference #3. Sold as a pair; two bushings for the front sway bar.

Available in STREET softer durometer, or RACE durometer of 95A.

These bushings are for the 22.7mm factory front sway bar ONLY. If you have an aftermarket sway bar, you need to source the appropriate bushings from that sway bar's manufacturer.

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to get soft and pliable over time and allow the sway bar to flex too much. Stiffer bushings restore stability and performance.

Comes with Powerflex's lifetime warranty!

INSTALLATION WARNING: The factory ND sway bars have the bushings bonded to the bars. That means that in order to install these aftermarket bushings you will have to remove the bar from the car and cut/grind off the factory rubber bushings.