PART NUMBER: 61-0530
READ REVIEWS (2) | WRITE A REVIEW
OUT OF STOCK
BRIAN'S APPLICATION NOTES: No extra lowering. Rebound and Compression are EXACTLY the same on these SPORT as on the Bilstein HD. The only difference is that these are about half an inch shorter, ideal for keeping max travel with lowering springs.
Brian's Application Notes: Part Two. Get enough requests for details specs comparing these Sports to full length HD version that we will put this spec comparison here so it can be found easier later.
FRONT SHOCK HD
Part Number: 24-131742
MSRP: $180.56
Weight (lbs): 4.92
Old Part Number: F4-BE5-D174-H0
Series: B6 (HD)
Collapsed Length (IN): 14.37
Extended Length (IN): 19.74
Collapsed Length (MM): 365
Extended Length (MM): 501.5
Lower Mount Type: Clevis
Upper Mount Type: Stem
Internal Design: Monotube
Finish: Yellow Paint
Boot Included: No
Mounting Kit: No
Spring Seat: E4-FT2-Z033A01
FRONT SHOCK SPORT
Part Number: 24-131766
MSRP: $180.56
Weight (lbs): 4.94
Old Part Number: F4-BE5-D176-H0
Series: B8 (SP)
Collapsed Length (IN): 14.37
Extended Length (IN): 19.39
Collapsed Length (MM): 365
Extended Length (MM): 492.5
Lower Mount Type: Clevis
Upper Mount Type: Stem
Internal Design: Monotube
Finish: Yellow Paint
Boot Included: No
Mounting Kit: No
Spring Seat: E4-FT2-Z033A01 ---
REAR SHOCK HD
Part Number: 24-131759
MSRP: $180.56
Weight (lbs): 5.25
Old Part Number: F4-BE5-D175-H0
Series: B6 (HD)
Collapsed Length (IN): 13.84
Extended Length (IN): 21.11
Collapsed Length (MM): 351.5
Extended Length (MM): 536.2
Lower Mount Type: Eye 18mm
Upper Mount Type: Stem
Internal Design: Monotube
Finish: Yellow Paint
Boot Included: No
Mounting Kit: No
Spring Seat: E4-FT2-Z033A02
REAR SHOCK SPORT
Part Number: 24-131773
MSRP: $180.56
Weight (lbs): 5.18
Old Part Number: F4-BE5-D177-H0
Series: B8 (SP)
Collapsed Length (IN): 13.84
Extended Length (IN): 20.76
Collapsed Length (MM): 351.5
Extended Length (MM): 527.2
Lower Mount Type: Eye 18mm
Upper Mount Type: Stem
Internal Design: Monotube
Finish: Yellow Paint
Boot Included: No
Mounting Kit: No
Spring Seat: E4-FT2-Z033A02
MIATA MX5-NC 2006-2008
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015
I bought and installed these with the progress springs, I didn't expect much from lowering the car only 1/2 inch, but I was wrong. The car corners like it's on rails and rides much smoother than the stock setup. I used the harbor freight strut spring compression tool for the fronts and a floor jack to push the rear mount into position. The biggest surprise to me was it didn't change my alignment.
I used these shocks with the Progress Tech springs for better handling and keeping a comfortable ride on the street. No way! The ride was very harsh. The shocks are not compatible with stock springs.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)