Racing Beat Sway Bar Brace Kit - Front

DESCRIPTION

Developed to stiffen any Miata chassis, this assembly proves most beneficial when using any relatively strong aftermarket sway bar, including Racing Beat's tubular bar.

This kit both effectively minimizes chassis flex that reduces sway bar performance and eliminates possible cracking of the sway bar chassis mounts that results from repeated hard cornering. Includes the blocks and bolts shown by blue arrow AND the white cross brace seen here which connects and boxes both the mounting points on both side of the car.

Fits all 1990-2005 Miatas.
*Old version used to not work with 90-95 cars that had Power Steering, but new updated version now works with all years with or without PS.

BRIAN'S APPLICATION NOTES: IF you want to install protection that you can forget see our product item 20-1021 HD mounts. These blocks and bolts are MUCH easier to install but need to be checked for tightness at least once a year.

Watch the Video by STR Racer Mike Heinitz. First video is WITHOUT protecting the mounts and the deflection under load is half an inch, which will eventually tears those mounts!

Now watch the second video by STR Racer Mike Heinitz and notice that with the blocks/bolts installed the flex is greatly reduced!