CART
RoadsterSport Fiat 124 HighFlow Crosspipe for Fiat-124
Images may differ from actual product appearance.

RoadsterSport Fiat 124 HighFlow Crosspipe

2017-2020

Add FLOW and FUN
BLACK FRIDAY SALE

PART NUMBER: 61-2102

READ REVIEWS (1) | WRITE A REVIEW

SALE
Reg. Price: $500.25

Sale Price: $391.50

Transmission

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

SALE
Reg. Price: $500.25

Sale Price: $391.50

Transmission

Quantity:

FREE SHIPPING

Free shipping offers apply only to destinations within US Lower 48.

DESCRIPTION

This is the KEY item to making your turbo come alive! Makes your turbo spool faster and at much lower rpms than stock. Stock crosspipe is terrible, starts at just 2 inches diameter and is pinched down to about 1.7 inches right at the inlet, which keeps your turbo from spooling quickly!

MUST be used with our RoadsterSport Midpipe or Magnaflow System One, will not install to small inlet of factory midpipe or other Magnaflow systems. So, you can work from the back of the car if you want to buy one piece at a time but that means you start with our DUAL or QUAD muffler, then get the Midpipe for a little sound and better flow, and then finish off the system with this Crosspipe. Give your turbo a full 2.5 inches of flow all the way and it will make you smile like never before! Automatic transmission compatible crosspipe has 2.25" piping to clear the transmission.

Includes new donut gasket for joint between crosspipe and midpipe - needed because this crosspipe is larger in diameter than the factory crosspipe and so the factory donut gasket is too small. You re-use your factory gasket between the downpipe and the crosspipe.

Yes, this is a CARB legal 'cat-back' item because it bolts to rear of stock converter.

This is the path to 200 Ft/lbs of Torque per our dyno graphs in our forum Fiat thread!

All POLISHED stainless steel construction and LIFETIME warranty. See our forum pictures showing comparison of restrictive stock crosspipe that crushes down to under 2 inches of flow, versus our clean 2.5 inch diameter highflow replacement.

Installation INSTRUCTIONS: PRINT FOR YOUR INSTALLATION, PRINT FOR YOUR INSTALLATION SHOP:
1. Remove lower shield
2. Spray O2 sensor with liquid wrench or similar, we use zep40 dual force and let soak 30 minutes and then remove.
3. Spray all 4 nuts, two at entrance flange for Crosspipe and two more at Crosspipe exit flange.
4. Loosen nuts at downpipe entrance but do not remove yet.
5. Loosen nuts at midpipe and remove and take springs/studs.
6. Stud removal process, double up two nuts to remove or half inch deep socket also fits over the stud.
7. Remove 13mm bolt that holds bracket near exit of Crosspipe.
8. Remove 2 nuts at entrance flange of Crosspipe that you loosened in step 3 and pull Crosspipe.
9. Reverse order to install, torque 18 to 20 ft/lbs.

Install Tips and Pitfalls. When installing new Crosspipe important not to jack it into place while it hangs on the nuts, instead hold it flat and flush to its home against outlet of converter while your other hand alternates spinning the retaining nuts upward in star pattern until all are tight, don't start with making just one full tight, must snug them progressively to get flat connection and good seal. Note that bracket attached to stock mounting point and the stock mounting point has room for adjustment as needed if you follow it back upward, you want to start with that really loose until after you get crosspipe flat sealed against the converter outlet. Connection at midpipe needs to be done with patience, start with installing studs first, and then add the springs and then add the retaining nuts. If nuts are jammed onto the stock studs before you start you need to separate those nuts with 13mm wrench, trying to force the studs over the springs and get the threading started with nuts already jammed onto the studs is too hard to do. Do NOT use header wrap on Crosspipes, header wrap causes fit issues and fast corrosion of the lovely stainless.

BRIAN'S APPLICATION NOTES: The FACTORY crosspipe is all crunch bends, crunched down well under 2 inches in several places, which delays turbo spool and limits top end power. The only way to get full benefit of your turbo is go clean mandrel bent pipe, ideally 2.5 inches all the way. Picture here compares stock crunch bent crosspipe with small outlet in the background to our full 2.5 inch all the way, including big 2.5 inch outlet RoadsterSport Crosspipe in the foreground. That BIG outlet means you must use this with our bigger diameter midpipes.

CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT

On Sale
'System ONE' is a unique ADJUSTABLE SOUND Muffler/Midpipe Combo!  Emissions Legal in ALL 50 States!
'System ONE' is a unique ADJUSTABLE SOUND Muffler/Midpipe Combo! Emissions Legal in ALL 50 States!

FIAT 124 2017-2020 · all

HELMHOLTZ Resonator for all the good sound you want. ADJUSTABLE SOUND midpipe with quick change resonator

Fits ALL versions of Fiat 124.

Optional Crosspipe!
BLACK FRIDAY SALE

* FREE SHIPPING

$1299.00

$1,079.10
REVIEWS (9)
On Sale
RoadsterSport Fiat 124 HighFlow Midpipe
RoadsterSport Fiat 124 HighFlow Midpipe

FIAT 124 2017-2020

BLACK FRIDAY SALE

* FREE SHIPPING

$499.00

$431.10
REVIEWS (1)
On Sale
KONIG HELIOGRAM 17x8.5 4x100 ET45 TITANIUM METALLIC *KNURLED BEAD*
KONIG HELIOGRAM 17x8.5 4x100 ET45 TITANIUM METALLIC *KNURLED BEAD*

FIAT 124 2017-2020 · 17x8.5

BLACK FRIDAY SALE
NEW!

* FREE SHIPPING

$285.00

$214.20
WRITE REVIEW
On Sale
Progress Technologies FRONT and REAR AntiSway Bar Combo!
Progress Technologies FRONT and REAR AntiSway Bar Combo!

FIAT 124 2017-2020

Our BEST All Purpose Sways, Street, Autocross, Track!

* FREE SHIPPING

$499.00

$439.00
REVIEWS (20)
RoadsterSport Rear Shock Tower Brace

* FREE SHIPPING

$199.00
REVIEWS (8)

TEAM RECOMMENDATIONS

Customer Reviews

RoadsterSport Fiat 124 HighFlow Crosspipe

After 4 years of owning and happily modifying my 124, incl. RoadsterSport quad tip axle-back, I finally took the plunge to add the cross pipe and (resonated) mid-pipe from GWR. The performance gains are distinct, and accompanied by the perfect sound: nice and throaty, yet civilized. The installing mechanic remarked repeatable on the quality of materials and workmanship. A couple of days after installation I tested the new exhaust out at the track: all smiles and grins. Improved lap times didn't hurt either.

What stands out even more than the product, though, is GWR's commitment to customer service. An ill-informed modification on my end triggered a domino effect, during which GWR and their fantastic staff patiently went way above and beyond what could be reasonably expected. From numerous phone calls, exchange of pictures, through verifying the pipe is not malformed, GWR hit it out of the park. This wasn't my first GWR purchase, and certainly will not be my last. It may sound over-the-top, but with GWR products, they will be in your corner to support them all the way. Just a tip (from a friend, of course): do not apply heat wrap to the cross pipe. It's too tight around the transmission, clearance will be negatively impacted.

Cheers from Austin, SL

Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)